Im a new guy here...first off, this is an awesome site and you guys are great.

Just bought a Vforce and am looking for a set of pipes. I have it down to Pro Circuit T-4s or the
Yoshimuras. Im looking for a place that has good service and a good price as these pipes are both pricey.
Also, I thought about a set of wheel spacers for the rears...I was wondering how these work on the V.
Thanks...Sam

 

Wheelspacers work great.(from highlifter) rockymountainatv.com has a lot of pipes at good prices, no sales tax, and good people to work with. They have gobs of stuff for the V. [img]i/expressions/face-icon-small-wink.gif[/img]

 

Duncan Racing pipes are the best for the V.
Duncan Racing

 

Hey Sandsam, the MBRP duals are a decent set of pipes. You can get them in the US from Bob Craycraft. We have a V with a little porting and compression running 5.6 -5.7 sec in 300ft on a track that's usually 2-3 tenths slow. Makes 46 hp at the rear wheels on my dyno. Even with the suspension strapped down the clutches had to be softened to keep the front end down. (would still wheely bad at 150 ft)
Even on a stock bike the MBRP's will give you enough power to use the Dalton over drive clutch cover and give you another 3-4 mph.

 

Thanks everyone for your replys....great info...Sam