Will 12" 589's or Mud Lites fit without rubbing on the rear on an 02 Prairie ? What about 10" on the front?

 

Welcome to the board. If you do a search for mudlites you will find lots of info. I have 26 ITP 589’s on C rims that fit fine. Keep in mind if you don’t already know that the C’s have a 1 in. offset. Gives me one more inch of room for the tire. Once again welcome.


DG Holeshot
DG Snorkel
K&N Filter
Dial-A-Jet
Nyroc Exhaust Mod
Primary Dalton Plain\white spring
Secondary EPI black spring
P-700 Belt
ITP 589's on C's
Warn 2500 winch
Headlight mod
Rear backup light

 

i have ITP`s 589`s 26 inchers on stock rims with no problems. they eat!

 

I ran 28"mudlites without the lift with no problems

 

I run 27" Titan 589 M/Ts 12" and 10" fine with highlifter lite steel wheels, no offset. No rubbing.

 

I run 26" ITP 589's on my prairie 700 and the are awsome. I also have a 2" lift and a warn 2500lb winch. My friend just bought a honda rancher AT400 4x4 and he has 26" ITP mudlites with C-series rims and they seem to do great. You probably can't go wrong with either. Good luck.

 

I run 28" ITP 589 m/s on my 650 and they are fine. I run them on my 700 and they will clip the front black plastic when turning sharp.