Installing new swing arm - bearings, orings, etc..
Aug 19, 2004 | 01:09 PM
#1
Thread Starter
|
Pro Rider
Joined: Jun 2003
Posts: 1,441
Likes: 1
Installing new swing arm - bearings, orings, etc..
Hey guys,
I'm installing a new swing arm this weekend and I need to know where i can find two parts, dont have to be OEM necessarly.
I'm missing the orings on the bearing carrier. Or should i say that didnt survive that last install and i couldnt get them in the bearing carrier housing on the swing arm without them being pinched out.
and pivot bearings. the bearings that are in the swing arm that rotate on the pivot bolt.
The swing arm is a LSR +4 on an 86 ATC.
I'm installing a new swing arm this weekend and I need to know where i can find two parts, dont have to be OEM necessarly.
I'm missing the orings on the bearing carrier. Or should i say that didnt survive that last install and i couldnt get them in the bearing carrier housing on the swing arm without them being pinched out.
and pivot bearings. the bearings that are in the swing arm that rotate on the pivot bolt.
The swing arm is a LSR +4 on an 86 ATC.
Thread
Thread Starter
Forum
Replies
Last Post
fordfaithful21
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
Dec 7, 2015 05:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)