I NO LONGER HAVE THE STOCK AIR BOX AND NEED THE PART NUBER FOR A K+N FILTER TO USE FOR THE BREATHER TUBE

 

I was goign to get the KN...but was at autozone the other day and saw some crank breathers for real cars. I picked one up that is about 2 inches wide, and about 3/4 inch thick. I am still trying to figure out where to route it, but the best part was that it was 2.50 instead of the 15 that the KN costs.

 

I put a small uni filter on the end of mine and put it up under the front of the hood behind the light.

 

Just run it to the elbow on the air tube where the stock carb connects to. One less air filter to have to clean.