My 04 650 has been blowing 30 amp fuses latley. I found a wire behind the snorkle coming off of the belt cover, that the sheathing was worn through so that bare wire was showing. I put liquid electrical tape on it to seal it up. Two hours of riding after that and the 30 amp fuse blew again. Any ideas???

 

Liguid neopreme is not made to work as an isulator repair where the wire rubs on something. Either tape it for real or if close to a connector, use heat shrink.

 

That would be my guess too. The liquid stuff just doesnt take much abuse, and it rubs off. Put a few wraps of good electrical tape, or silicone tape, and maybe use a zip tie, to hold the wire away from where it rubs.