I want to be able to climb sand mountain in nv and beat or at least stay with like 250, 300 and maybe a 400ex up. But I dont want to be at bottom of the hill when the z400, and shees, yfzs are at the top when we left at the same time but rather be half way there.. I want to mod my blaster some more but i want the right mods for the dunes. What do you suggest? Any replies will be greatly appreciated. With the mods you suggested what will I be able to beat up a sand hill, or in a sand drag. Thanks again.

 

What can I beat now like a 250ex? And we have paddles in the race.

 

Anyone?

 

Get your LRD pipe or a Phantom pipe from Project Blaster, then get your cylinder ported with head mod for some more compression, then get a 30mm carb like the one I have on ebay right now [img]i/expressions/face-icon-small-wink.gif[/img]

You will climb that hill then in style, not with the Z400's but not far behind either.

sr

 

what is the item link of the one you have on ebay? I am looking into getting a bigger carb unless I find someone who knows how to bore a carb

 

Okay I will get a lrd pipe, carb, porting. What will I beat up or in a drag with these mods? What paddels I was looking at skat trak haulers. What about 240 kit? Will my stock suspension be fine for the dunes?

 

Go on ebay and buy the port job from RB racing for like 100 or 140 bucks. Your hp will about DOUBLE from this one mod. I did it to my blaster, and I seriously smoke other ported blasters. BAD.

 

Okay. I will look in on them. I was thinking about trenga porting also. Others what is your favorite place to get porting?

 

Trenga porting would be a good choice also, but expect to pay over twice as much for very little more power.