first time adjusting the valves on the warrior. when i line up the cam sprocket line and the mark on the head, the "t" is not lined up with the mark in the window. if i line up the "t" properly, the sprocket line and head mark arent exactally lined up. i tried to turn the crank one revolution and still not lined up. are they suposed to be EXACTALLY lined up? (which i figure they should be) maybe the cam chain jumped a tooth? any ideas/ suggestions are appreciated.

 

Every Warrior Ive ever owned did the same thing. The mark on my cam gear is a little to the right of the mark on the head.

 

ok, thanks. so adjust with the "t" in the proper place.