Does anyone know if the factory wheels from a grizzly or a wolverine will bolt right up to a big bear?

 

All three machines share a common bolt pattern, 4x110. If the Grizzly is an 02 or newer, the rear wheels will have a different off-set than the Big Bear or Wolverine due to the IRS. 07 Big bears will have the same rear off-set as the Grizzly, again due to the IRS.

 

They will, but the offsets in them are different. I got some wheels off a Rhino SE a few years back from a generous atv connection member. [img]i/expressions/face-icon-small-smile.gif[/img] The offset in the wheels are different so I bought some wheel spacers to bring them back out to near stock width. Take a look at the pics I have, it shows a before and after.