Yamaha Discussions about Yamaha ATVs.

Raptor wont stay on

Thread Tools
 
Search this Thread
 
Old May 25, 2007 | 02:43 PM
  #1  
natedawgls's Avatar
Thread Starter
|
Trailblazer
Joined: Dec 2006
Posts: 29
Likes: 0
Default Raptor wont stay on

since i took the baffle out the other day the 660 wont stay at idle it shuts off
it stays on when choked and it rides fine when choke is off as long as i keep on the throttle a bit but if a get off and leave it to idle it shuts off
 
Reply
Old May 25, 2007 | 03:28 PM
  #2  
toddmh's Avatar
Pro Rider
Joined: Jun 2004
Posts: 591
Likes: 1
Default Raptor wont stay on

anytime you change anything in the exhaust ..you must rejet your carb..Why did you take it off anyway??try to adjust the idle screw on the bottom of your carb,thta may help..
 
Reply
Old May 25, 2007 | 04:21 PM
  #3  
lucasislight's Avatar
Pro Rider
Joined: Nov 2006
Posts: 280
Likes: 1
Default Raptor wont stay on

you are running too lean, you need to richen your idle and probably rejet both your carbs richer as well. when you pull your choke on it richens up the circuit, causing it to run better.
 
Reply
Old May 25, 2007 | 07:28 PM
  #4  
velocyraptor's Avatar
Pro Rider
Joined: Aug 2005
Posts: 701
Likes: 0
Default Raptor wont stay on

BUT dont use it with the choke on
 
Reply
Old May 28, 2007 | 05:42 PM
  #5  
beaty's Avatar
Range Rover
Joined: Sep 2006
Posts: 146
Likes: 0
Default Raptor wont stay on

i dont no why your having proplems iv take the baffle out of two 660s and they run fine
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bmxatv10
Yamaha
58
Oct 14, 2022 06:23 PM
Johnny Mac
Honda
5
Aug 15, 2019 03:13 PM
r1pilot83
Polaris
9
Sep 27, 2015 07:38 PM
2many2ride
Honda
7
Sep 27, 2015 04:35 AM
black_thunder
ATV Videos
0
Sep 22, 2015 07:59 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 03:06 AM.