http://www.cbc.ca/consumer/rec...nds_atv_recall_to.html

Polaris ATVs ran fine without these ECM things,can,t Polaris just go back to not having them? What advatages do these things have anyways over the ATV without them?

 

what is an ecm? is there on on a polaris scambler 2001 or polaris sport 400l 1998?

 

o ok thats the lil black box on top of the radiator? with all of the wires going into it. isn't that a voltage regulator?

 

<div class="FTQUOTE"><begin quote>Originally posted by: sprinter10

what is an ecm? is there on on a polaris scambler 2001 or polaris sport 400l 1998?</end quote></div>


Electronic Control Modules , I do not think they were introduced until second half of 2004 so your ok.

The also make the ATV not run unless it has a healthy battery so the pull start as a back up is almost pointless now.

 

what does it realy help do then. i am getting a 4/4 soon hopefully a sportsman and i whant to know what i am in for. y do they have them my scrambler runs fine charges teh battery and can run with a dead battery from winching or anything. what is the point?

 

well i joined the letter recievers on the recall yesterday on ECM on the 06' sportsman 450 from polaris. ive been trying to remember the guys name who bought it but cant recall it. ill hang on to it in case he calls ever on it.

 

Do the recall apply to polaris 450SP sold in Canada?

 

I'm glad the 07s are still ok... Untill they expand it a few more years. I wonder if Caper could take his in for a fourth ECM [img]i/expressions/face-icon-small-smile.gif[/img]

 

Originally posted by: brutus450

https://www.polarisdealers.com/servw...ning%20Kit.pdf

This is the old service bulletin, not the latest.

Downloading the new one, be back shortly

There is no testing involved at all on the new bulletin, just replacement(matter of fact I had to send the tester back to Polaris that they issued years ago) Even if your ecm was tested and passed, they are still probably going to replace it. If you have a model in the vin range and it is the potted ecm and not the unpotted die cast ecm, it will get replaced. Basically, if your machine has 3 different connectors on the ecm, it's gonna get replaced. The newest ones have one large connector, a short harness, and then the three connectors. They are not getting replaced.

try this

https://www.polarisdealers.com/Virtu...20Bulletin.pdf

 

im seeing alot more post on this crappy ecm they got of hold of. they should have done this recall in 06' when then they realized it covered such a wide number of bikes. but better late then never i guess.