Hello all,

my Son and I were out riding yesterday and his falcon 90 stalled he tried to restart it and it sounded like the starter wasn't engaging. So after trying to get it to engage I ended up pulling him back. I tore it apart today after purchasing a new starter from my local dealer replaced it and the same thing happens so I removed the left magneto cover and ground it so I could see what it is doing and found the starter is working but the sprocket on the crank is just spinning on the crankshaft and not turning the engine over. my question is how is this fixed the teeth on the sprocket are fine but I cannot get the magnet off of the crank to check and see how the flywheel gear as I call it locks in place. Any help would be appreciated. Thanks for your time