Honda Discussions about Honda ATVs.

I'm thinking of running some Kendas on the rubie

Thread Tools
 
Search this Thread
 
Old Aug 2, 2008 | 04:12 PM
  #1  
BlueRubie's Avatar
Thread Starter
|
Range Rover
Joined: Jun 2008
Posts: 196
Likes: 0
Default I'm thinking of running some Kendas on the rubie

I'm looking at getting some kenda executioner K-538. . .

26x10-12/27x10-12's on the front and 26x12-12/27x12-12's on the rear.

26's or 27's whats best ?
Next time i get stuck i want it suck good n deep I want the pretty blue paint plastard !
The stock tires don't all that much in Mud but in water i can sink it to the Gas cap
:-)

anybody know if they make a Super swamper TSL for an ATV ? ? ?

Mike D
 
Reply
Old Aug 2, 2008 | 06:38 PM
  #2  
jrafter's Avatar
Pro Rider
Joined: May 2006
Posts: 543
Likes: 0
Default I'm thinking of running some Kendas on the rubie

executioners are the best tires ive ever had ....they run short but they ware great......you will not be unhappen with them.

i do mostly trail riding and they ride nice
 
Reply
Old Aug 2, 2008 | 06:59 PM
  #3  
BlueRubie's Avatar
Thread Starter
|
Range Rover
Joined: Jun 2008
Posts: 196
Likes: 0
Default I'm thinking of running some Kendas on the rubie

Sweetness ! I was thinking of going more toward the 27x10's and 27x12's. . . i want it float a bit more it dose now. . .

Mike D
 
Reply
Old Aug 2, 2008 | 07:13 PM
  #4  
jrafter's Avatar
Pro Rider
Joined: May 2006
Posts: 543
Likes: 0
Default I'm thinking of running some Kendas on the rubie

i have a rancher 420 and im sorry i didnt go 26 or 27.....but they are nice.

i also ordered them mounted on itp steels wheels which i like a lot more that the honda rims
 
Reply
Old Aug 2, 2008 | 07:15 PM
  #5  
jrafter's Avatar
Pro Rider
Joined: May 2006
Posts: 543
Likes: 0
Default I'm thinking of running some Kendas on the rubie

oh and rim protection is the best ive seen
 
Reply
Old Aug 2, 2008 | 07:34 PM
  #6  
BlueRubie's Avatar
Thread Starter
|
Range Rover
Joined: Jun 2008
Posts: 196
Likes: 0
Default I'm thinking of running some Kendas on the rubie

Well your well informed and very helpful thanks much. . .

Mike D
 
Reply
Old Aug 9, 2008 | 09:53 PM
  #7  
mudder fudder's Avatar
Weekend Warrior
Joined: Aug 2008
Posts: 22
Likes: 0
Default I'm thinking of running some Kendas on the rubie

I have a 07 420 rancher with 27 inch kendas it will eat some mud. I put mine on some ss212 itp wheels it looks great. They are a little ruff riding on rocky trails or on pavement bu[img]i/expressions/face-icon-small-happy.gif[/img]t to float or mud there great....
 
Reply
Old Aug 9, 2008 | 10:36 PM
  #8  
BlueRubie's Avatar
Thread Starter
|
Range Rover
Joined: Jun 2008
Posts: 196
Likes: 0
Default I'm thinking of running some Kendas on the rubie

I'm going with 27x10-12's on front and 27x12-12's on the rear. . .

I'm going to be a cheap skate and stuff them on my shiney stock rim's. . .

Mike D
 
Reply
Old Aug 10, 2008 | 12:37 AM
  #9  
mudder fudder's Avatar
Weekend Warrior
Joined: Aug 2008
Posts: 22
Likes: 0
Default I'm thinking of running some Kendas on the rubie

that is the size i went with but i had 2 put a 2inch lift on the atv to keep the things from rubbing. on sharp turns it still will rub my winch
 
Reply
Old Aug 10, 2008 | 01:09 AM
  #10  
BlueRubie's Avatar
Thread Starter
|
Range Rover
Joined: Jun 2008
Posts: 196
Likes: 0
Default I'm thinking of running some Kendas on the rubie

It's a hondam they were built to be beaten. . . a 2 inch lift is plenty fine now run her till she wears out. . .

I'm going to prolly beat mine plenty but i do beter than routine maintance so the beast should still last 25,000 miles. . .

Mike D
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TegraQuad
1) Engine problems..
13
Nov 26, 2017 01:40 PM
scaldwellk
Suzuki
2
Jun 19, 2015 05:08 PM
BEEFKING69
Chinese Quads
5
Jun 17, 2015 12:38 AM
SP335AOK
Buying an ATV
3
Sep 6, 2000 09:38 AM
RidE
Buying an ATV
3
Aug 6, 1999 02:34 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 03:27 AM.