Grizz Snorkle
#1
Hey guys I just tested the intake snorkel on my grizz and it was freakin awesome. I had it up to the gas cap and chugged my way through the mud hole with no problems. And any of you having problems with the pop, pop, pop when you hit a mud hole or water ? Well my new intake snorkel fixed it I highly recommend getting one.
#4
Well in my pic's you can see the belt drive snorkle I did that a couple months ago but I kept having trouble with the steam getting into the carb from under the plastics so I snorkled the carb intake.
I did both my self the carb intake come straight up between your legs and the tank some people sell kit the replace your air box lid with one that has four small pipe fittings on top that you can then route to the front like the belt pipes but they restrick air flow, require rejetting and cut's HP. So mine may be a little uggly but when I was submarining through a mud hole it sure worked well.
I will post some pics when I get some time this weekend.
I did both my self the carb intake come straight up between your legs and the tank some people sell kit the replace your air box lid with one that has four small pipe fittings on top that you can then route to the front like the belt pipes but they restrick air flow, require rejetting and cut's HP. So mine may be a little uggly but when I was submarining through a mud hole it sure worked well.
I will post some pics when I get some time this weekend.
#6
As promissed I posted the pic's of my intake snorkle on my bio. 2, 3, 5, 8, and 12.
#12 is a good shot of why I think this is a better set up. I know it's ugly but the kits that re-route your intake up front restrick air flow and lets face it I didn't built this bike to enter a beauty contest.
#12 is a good shot of why I think this is a better set up. I know it's ugly but the kits that re-route your intake up front restrick air flow and lets face it I didn't built this bike to enter a beauty contest.
#7
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




