I AM REBUILDING A BAYOU 220. I AM INTO THE FRONT BEVEL CASE AND
HAVE CLEANED IT UP. ALL LOOKS GOOD BUT I HAVE A ABOUT 1/2 TO 3/4 INCH PLAY IN THE BEVEL GEAR (15 TOOTH GEAR) THAT ATTACHES TO THE SHAFT
GOING INTO THE TRANNY. IS THAT A NORMAL AMOUNT OF PLAY OR IS IT
IN NEED OF GOING DEEPER IN. ALL OTHER AREAS HAVE BEEN VERY GOOD AND TIGHT, NO EVIDENCE OF WEAR AND NO METAL PARTICLES. THANKS FOR ANY HELP.