separating driven pullies while changing belt ac 650 '07
Mar 1, 2009 | 12:08 PM
#1
Thread Starter
|
Trailblazer
Joined: Mar 2009
Posts: 41
Likes: 0
From: Bentley, LA
separating driven pullies while changing belt ac 650 '07
my cousin has an '07 650 h1. the belt needs to be replaced. we got the belt off by removing the outer section of the drive pulley. It appears that I need to thread a bolt into the center of the driven pulley to seperate the two halves in order to fit the new belt on. I need to know if anyone knows what size bolt that I need. All of my quads have always been manuals, and I don't regularly work on automatics. Any help would be appreciated.
Mar 4, 2009 | 06:36 PM
#2
Thread Starter
|
Trailblazer
Joined: Mar 2009
Posts: 41
Likes: 0
From: Bentley, LA
separating driven pullies while changing belt ac 650 '07
I talked to someone at speedwerx. they told me it is an 8mm bolt. not sure of the thread pitch. will check local bolt supply house. will tell when i figure it out.
Thread
Thread Starter
Forum
Replies
Last Post
Steeldon
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
4
Sep 9, 2015 09:38 AM
cdstang
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
2
Aug 31, 2015 07:52 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)