I have been told 0.28 -0.36 .. What should it be ?

Thanks in advance

NOTE

I found it in the clymer book (came in mail today) 0.35

 

My Clymer manual says .028 and the Polaris manual says .036

I gap mine at .036 when I change it.

 

My Clymer says

96-98 .0024-.028

99-2000 .028

2001 and up .036

 

Intresting My Clymer says
96-97 .024 BGK BKR5E
98-01 .035 BGK BKR5E
02 and up .035 BGK BKR6E

 

I don,t know about Clymer's info sometimes. They say you have to remove the primary and secondary clutches and belt housing back plate just to remove a starter,which is just plain silly.

 

Thats funny I just replaced my starter yesterday and noticed that. My friend has the haynes guide so I had him look it up and it had no mention of removal of the primary and secondary clutches . I followed haynes directions and it was a quick job.

I might pick up a Haynes for back up ref and follow the one that makes the most sense

 

Actually, now that I look closer, it is listed correctly in the supplement at the back of my Clymer book.

Mine is the 2nd edition, third printing in August 2007. How about your guys?

 

Mine is the third edition first printing september 2008. Well atleast this makes alittle more sense now

 

Mine says Second edition

second printing, Aug 2005.

Bar code

ISBN 0-89287-893-2