Polaris Discussions about Polaris ATVs.

Loud Polaris Trailblazer 250

Thread Tools
 
Search this Thread
 
Old Aug 16, 2009 | 10:14 PM
  #1  
blackmuttracing's Avatar
Thread Starter
|
Weekend Warrior
Joined: Aug 2009
Posts: 5
Likes: 0
Default Loud Polaris Trailblazer 250

I have an '05 Trailblazer 250 with an aftermarket pipe/can combo. I love the power and I don't mind the sound. However, everyone else does seem to mind the sound. Anyways, any suggestions on a muffler or something that won't compromise the power too much (I realize that I could just go back to the dealer and get a stock pipe, but I don't want to do that).

Thanks for any help
 
Reply
Old Aug 17, 2009 | 06:03 AM
  #2  
ftwflh's Avatar
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Joined: Apr 2000
Posts: 6,688
Likes: 1
Default

THe quietest would be a stock 400 Scrambler muffler.Wont cost much in the HP dept.The best would be to find a FMF TurbineCore II or HPD Quiet serries
 
Reply
Old Aug 17, 2009 | 07:33 AM
  #3  
drlang's Avatar
Pro Rider
Joined: Mar 2005
Posts: 1,635
Likes: 0
From: Wisconsin
Default

Originally Posted by ftwflh
THe quietest would be a stock 400 Scrambler muffler.Wont cost much in the HP dept.The best would be to find a FMF TurbineCore II or HPD Quiet serries

Yep. all that. The stock 400 can is quiet bu t heavy. I don't like loud. Is there any way you can repack yours and then put a 90* turn down on it some how? Doc
 
Reply
Old Aug 18, 2009 | 06:38 PM
  #4  
blackmuttracing's Avatar
Thread Starter
|
Weekend Warrior
Joined: Aug 2009
Posts: 5
Likes: 0
Default

Name:  ATV001.jpg
Views: 7677
Size:  98.4 KB

here is kinda a better idea of what i got
 
Reply
Old Aug 18, 2009 | 08:32 PM
  #5  
drlang's Avatar
Pro Rider
Joined: Mar 2005
Posts: 1,635
Likes: 0
From: Wisconsin
Default

That looks RCR to me, that end cap should be steel. Find something around an 1 1/4 diameter in a 90* bend and tack it on and see if it makes it better.
 
Reply
Old Aug 29, 2009 | 11:53 PM
  #6  
blackmuttracing's Avatar
Thread Starter
|
Weekend Warrior
Joined: Aug 2009
Posts: 5
Likes: 0
Default

Originally Posted by drlang
That looks RCR to me, that end cap should be steel. Find something around an 1 1/4 diameter in a 90* bend and tack it on and see if it makes it better.
i tries a 90* turndown, made it louder. i did, however, take off that end and open it up. when i slid off the outter sheath, the inner core was just the two ends and a roll of mesh type metal forming a tube. a little bit of 'insulation' type material came out but not much of it was in there (i imagine that stuff is what i would repack it with?).

i guess i might have to just get a stock silencer
 
Reply
Old Aug 30, 2009 | 01:20 AM
  #7  
drlang's Avatar
Pro Rider
Joined: Mar 2005
Posts: 1,635
Likes: 0
From: Wisconsin
Default

That is where you repack the silencer, for about ten dollars on ebay you can buy the material.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ramman1
Kids Quads
5
Aug 11, 2022 01:53 PM
user493
Other ATV Topics
5
Aug 13, 2015 12:54 PM
ATVC Correspondent
Polaris Side by Sides
4
Jul 30, 2015 12:14 PM
shewshew989
General Chat
1
Jul 14, 2015 03:09 AM
shewshew989
Polaris
1
Jul 14, 2015 02:54 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 06:24 PM.