Any Ideas?
Mar 14, 2012 | 05:42 PM
#1
Thread Starter
|
"Official Site Skeptic"
Joined: Sep 2007
Posts: 1,894
Likes: 0
From: B.C. Canada
Any Ideas?
I would like stop the EPS from cutting out as the speed increases or at least raise the cut out point.
When riding on Tracks with 35% lower gearing, the EPS sensor thinks the atv is going faster (mph) than it is and that makes steering REALLY TOUGH when it cuts out in heavy, wet snow.
Open to suggestions.
09 550XP EPS
When riding on Tracks with 35% lower gearing, the EPS sensor thinks the atv is going faster (mph) than it is and that makes steering REALLY TOUGH when it cuts out in heavy, wet snow.
Open to suggestions.
09 550XP EPS
Mar 14, 2012 | 05:59 PM
#2
Polaris ATV Expert
Retired and loving it!
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
Not too up to date on tracks down here,especially at 78 degrees today 
, but only way I can think of is to some way by pass the speed sensor. At least the break down shows a separates sensor for this and don't know if it's tied into the brain box too?? OPT
, but only way I can think of is to some way by pass the speed sensor. At least the break down shows a separates sensor for this and don't know if it's tied into the brain box too?? OPT
Thread
Thread Starter
Forum
Replies
Last Post
fordfaithful21
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
Dec 7, 2015 05:52 PM
Elkaholic
Land, Trail and Environmental Issues
1
Sep 6, 2015 02:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)