I recently took the parking brake off of my 2000 Warrior.I am waiting for the brake block off i ordered.My question is there is a switch located by the clutch lever that when not pushed in causes the quad to cut out and not run as it thinks the parking brake is activated.Can i remove this switch somehow and any help would be greatly appreciated thanks!

 

You can just unplug the switch and it will stop.

 

O.K.
I unplugged the switch and it is still cuttin out.
Do i have to remove it from the C.D.I. box?
Thanx again!

 

OK, I think I got mixed up with the clutch safety switch. On the E-brake switch you need to connect the wires together. Sorry 'bout that.

 

So i just cut the switch thing off the end and crimp the two wires together?

 

The best way to do it to just unplug the switch from the wiring harness and make a little jumper wire with the correct crimp on ends to connect the old wires together.

 

Is this on every year warrior or just the new ones? I have a 96, will it be ob mine?

 

Hey RaptorZone, you got squashed on ********* by Screamin96 I don't think he liked your links

 

LOL, I see that.

 

O.K. i got an idea of how to do this but im a jackass so could you kinda explain it a little more in detail for all us jackasses?
I would appreciate it alot.
Then i can take the damn duck tape off of my lever that im usin to keep the switch pushed in!
DONT LAUGH!
Thankx