stud removeal

Reply Subscribe

Thread Tools

Search this Thread

May 6, 2001 | 08:52 PM

sweetcorn

Thread Starter

Range Rover

Joined: Jun 2000

Posts: 189

Likes: 0

I read the post on stripped studs, One of the threads are all stripped. I have tried to hammer it out but it will not budge, do you have to grind the rear off? or is there some thing I am missing Thanks

May 6, 2001 | 09:18 PM

wikmaan

Weekend Warrior

Joined: Jul 1999

Posts: 21

Likes: 0

When I get a stuck stud, I remove the hub, put it in a vise with a large nut or impact socket behind it, and just press it out. Apply anti-seize to the spines before reinstalling hub.

May 8, 2001 | 10:46 AM

broke

Trailblazer

Joined: Jul 2000

Posts: 96

Likes: 0

hey I had a broken off stud in my quadracer 500's front hub, I used a air hammer with a punch bit, the stud flew aout 3 ft when it came out...worked great. Good Luck