I have a quick question to the owners of the 2004 650 who have the RF filter,
I just came back from the dealer and he installed the RF filter, the exhaust gromet (for the hot screws), and installed my new arctic cat rear bumper. My question is where did he put the RF filter? what does it look like? I was so excited to get my wheeler back that I forgot to ask....can anyone help a fellow Arctic brother out? Thanks.

 

It's a little box the size of a match stick box. It has connectors that get plugged into the belt switch located on the belt cover. They disconnected the wireing harness that went to the belt switch, pluged one lead of the RF filter to the wiring harness, the other lead from the filter went to the belt switch. The filter itself should be wire tied to the wiring harness that runs right above the belt cover under the side panel. Oh, buy the way, there's also a ground wire going to a bolt on the engine.

 

thanks for the reply diginit, would I be able to see the little box from the outside or will I have to take the belt cover off? thanks again.

 

I have the RFfilter on my bike and yes,you should see it,it won't be inside the cover.

 

thanks for the response, I will check it out tomorrow, since its to dark outside to see. The new Arctic cat rear bumper rules!