Could someone please look at there 650V2 and tell mw what the color of the wires are that go through the connector for the KBEC. I do not have a AC wiring diagram it would probably say in the maintenance manual but somecould probably just take a look at theres and tell me. Something like
Blue - Black
Black - blue
Red - yellow
yellow - brown
orange -green

I am desperate guy's please help.

 

I will be with you momentarily.....

 

Can you tell me what exactly KBEC is?

 

Its the engine brake thing on the clutch cover, I think it is labeled engine brake actuator in the manual.

 

red blue yellow and pink coming from the acuator.

 

Thanks V2, but I need to know what colors meet what colors at the black connector coming from the actuator.
Something like this. The connector got mangled so I have to solder the connector.

(this is an example)

Blue to black
Red to brown
yellow to orange
pink to green
and there should be a black

 

Got it, let me write it down quick, i had to take the vent for my belt box off.

 

BLUE - GREEN
YELLOW - YELLOW WITH ORANGE STRIPE
ORANGE - BLACK AND DARK GREEN
RED - BROWN WITH WHITE STRIPE
BLACK - BLUE WITH BLACK STRIPE

 

Take it off and leave it off,end of problem.

 

I think you need this connected to engage the drive belt upon startup.