Arctic Cat Discussions about Arctic Cat ATVs.

Small problem after jetting

Old May 6, 2003 | 07:29 PM
  #11  
CatKrazy's Avatar
Thread Starter
|
Pro Rider
Joined: Feb 2003
Posts: 878
Likes: 0
Default Small problem after jetting

Yea she is a little black now not much

Also just contact that seller and ask him if he will still sell it. im sure he will. offer him what the starting bid was and get it. It is well worth it.

Also go take a look at how I mounted the Trapp and the pics of it. I finally posted them.
 
Reply
Old May 6, 2003 | 07:47 PM
  #12  
voodoo's Avatar
Pro Rider
Joined: May 2002
Posts: 651
Likes: 0
Default Small problem after jetting

Yup just emailed him. No one bid on it at all heh, hes got a bunch for various machines no one had bid on. Just about to look at those pics. My 98 will no doubt be diff yet...
 
Reply
Old May 6, 2003 | 09:14 PM
  #13  
Snochopper's Avatar
Weekend Warrior
Joined: Apr 2003
Posts: 25
Likes: 0
Default Small problem after jetting

I just finished putting the same one on my 02', its an easy mod (rear strap add on) but dont expect him to reply too fast, he is slow to return emails but the stuff comes as advertised. As far as the plugs go, med brown is perfect and as far as the clip position goes raise the clip to lean and lower to richen. Also, that muffler will prob. be relisted in the next few days, just do a search for "arctic cat supertrapp muffler"
 
Reply
Old May 6, 2003 | 09:24 PM
  #14  
voodoo's Avatar
Pro Rider
Joined: May 2002
Posts: 651
Likes: 0
Default Small problem after jetting

Thx snochopper. Just so i got this right, raise the clip (lower the needle) less gas = leaner, lower the clip (raise the needle) more gas = richer? The lower the main the leaner? Ive also read that you should jet the pilot, then the main then the needle? Any input on that?
 
Reply
Old May 6, 2003 | 11:19 PM
  #15  
CatKrazy's Avatar
Thread Starter
|
Pro Rider
Joined: Feb 2003
Posts: 878
Likes: 0
Default Small problem after jetting

If you lower the clip,then you are going to run leaner. In other words counting from the top notch is #1. I had mine on number 3 and went to number 2 and jetted my main from a 148 to 146. Also Seat your pilot "turrn it clock wise till it stops" the turn it back 3 full turns! Should be right on the money

I got something for you vewdew

go here http://www.ansley.net/rubicon.php

at the top click sevice tips and scrool down and click on carb jetting tips!!!
 
Reply
Old May 6, 2003 | 11:50 PM
  #16  
voodoo's Avatar
Pro Rider
Joined: May 2002
Posts: 651
Likes: 0
Default Small problem after jetting

Ya ive seen that guys site. Was seeing if i rememberd what I read, guess not. After all I am just a computer geek. Added ya to AIM, catch ya lata.
 
Reply
Old May 6, 2003 | 11:59 PM
  #17  
CatKrazy's Avatar
Thread Starter
|
Pro Rider
Joined: Feb 2003
Posts: 878
Likes: 0
Default Small problem after jetting

What is your screen name on the AIM.

Was I right about the clip on the needle? I get confused also
 
Reply
Old May 7, 2003 | 12:02 AM
  #18  
CatKrazy's Avatar
Thread Starter
|
Pro Rider
Joined: Feb 2003
Posts: 878
Likes: 0
Default Small problem after jetting

Since your so good with PCs how do you get the little

CLICK, CLICK and CLICK thingy to direct people to certain pictures!!!!

THIS OUTTA BE FUN
 
Reply
Old May 7, 2003 | 12:25 AM
  #19  
voodoo's Avatar
Pro Rider
Joined: May 2002
Posts: 651
Likes: 0
Default Small problem after jetting

umm its vewdewcat . the what click thingy, click click thing?
 
Reply
Old May 7, 2003 | 12:48 AM
  #20  
CatKrazy's Avatar
Thread Starter
|
Pro Rider
Joined: Feb 2003
Posts: 878
Likes: 0
Default Small problem after jetting

You know

Like when you were showing your winch an dyou posted a direct link here.

You said

this,this and this

And each one of the "this" would take you to the link were your picture was at
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:48 AM.