I rejetted the needle today, Not spacers or washers came out,just the white clip looking thing and the needle,so i installed the new adjustable needle and set air mixture to spec and put my super trap back on. now when it idles it sounds like it cams. kinda idles up and down? Where is the problem out. Which part of the carb to I need to readjust!!

Thanks

 

At idle it should be the pilot.

 

So i can adjust the air mixture screw and get it right?

 

Yes. Some get away with adjusting while the machine is running (depending on your tools) Could be an air leak as well. Re check your boots on either end.

 

yea thanks man

I went ahead and rejetted, The pulg was very black and dry!

So i went from the 148 main to the 146, and set my needle down 1 more clip to number 2! Havent ran it yet but im fixing to fire her up!!!!

 

Main seems ok but I dont know if you'll need the needle to be that rich, usually you can get the Idle with the pilot (as mentioned). How many disc's are you running?

 

This is up in 35 mins, http://cgi.ebay.com/ebaymotors/ws/eB...tem=2413486276

 

Im running 10 disc and SHE IS ONE BAD CAT!!!!

UNBElIEVABLE THROTTLE RESPONSE AND GREAT TOP END!!!!

I got her tunned right now!!!

PLUG LOOKS GREAT!!!!!!! STILL A LITTLE BLACKISH BUT LOOK SGREAT!!!

IDELS JUST PERFECT!!!!!
I fixing to take some pics of her

 

Cool CK. Sounds like you got it! I dont know much about jetting the needle, mine you can adjust. My plug is very black. Carb is all stock. There are some great reads on here about it though. Better to have a little black on the plug to be safe. Sounds like the cat is better than ever!

 

Damn it, No one bid on that muffler. I wasnt home and missed it! I am going to get the Super, the Megamaxx i will plug with water and mud for sure.