I rebuilding a 350x. It has a complete DG exaust system and K&n filter. I was wondering what jets should I run in it for it to be at best performance. I habe two carbs for it and one has factory jets and the other has a 180 instead od 138. Is this too much jet? I am rebuilding the motor and putting a wiseco dome piston kit in it also. I would like to put a web cam but the cam I want needs the spring kit so Ill hold off of that one for a few months. Any help for the jetting would be awsome. Thanks

Also if anyone knows where I can get a complete back brake system get in touch.

 

I suggest you go to Golden West Cycle.com,
and order a catalog. Get the carburetor kit. You might
be fine since you got a new cam and exhaust.


------------

86 350x
Cobra Jet Exhaust
.040 wiseco Dome-Top piston
K&N Filter
Sprockets
White Brothers Cam & Valve Spring Kit
Bigger Carb

 

To high in my opinion (I have 150 main). Check my pics. Been there. Go here
http://www.rageperformance.com/carburetorparts.asp

 

Well turn to find out the cam that the guy gave me when I bought the bike was not even the right cam for the bike!. Most sites want a core to rebuild and I dont have one. Any one know a site where they have cams for the 350 x without needing a core, or if anyone has a good cam, factory or not, get in touch and I'll buy it from you.

 

hotcam has no core charge and you get a new cam not reground


hope this helps

 

I have looked at the hotcams and The only one I see is for the 400ex. That sucks cause they're at a good price.

 

Call them your bike 18 years old they will not have it in the add's call and ask them if they have one or will grind u one

 

I emailed the guy and he told me that they dont make a cam for the bike and that he dont think they will cause they are booked up til 2005 with new cams to make for all new bikes comming out.

If anyone has a used 350x cam and want to sell it please contact me.

 

Sorry too hear that i hoped you could get one there

Maybe someone else will know where u can find one

 

Well I have my cam and I still dont know what jets to try in the carb. I bought a rebuild kit today and I guess Ill se how it runs first to mak changes.