I was trying to get the front axle outta my trike and it wouldn't come all the way out so i used a big flat head screw driver and a rubber mallet to try and pound it out now the screwdriver is stuck in the axle hole and i can't get it out any idea of how i can get the screw driver out and the axle out??

 

If it went in there, it will come out.

It sounds like you are saying that the screwdriver is lodged between the axle and housing.

My suggestion to you is to heat up the housing while pulling the screwdriver out.

 

Take a small end wrench and put it between the handle and the rim on the screwdriver. Then whack it with a hammer. If that don't work, get a bigger hammer.

 

I got the screw driver out i just banged the axle back in and the screwdriver came out then i used the wrench idea to get the axle out..