85 250r
#5
i run 40:1 on my r and it doesnt foul plugs, i dont know if too much oil will cause it to foul but i do know that a dirty air filter will and i know from experience that too much oil causes your airfilter to get dirty realy fast cause the dirt just stick real easy.
#7
Trending Topics
#9
you should run 40:1 with a decent oil. 32:1 is ok but if your lugging around it will foul plugs. remember more oil in your gas is not richer it is accully leaner (air to fuel ratio).
i ran my bike 80:1 with redline 2 stroke oil
i ran my bike 80:1 with redline 2 stroke oil
#10
I use a br9es and run my fuel @ about 35:1.
I had similar symptoms a few years back.
Bought a new air filter and it cured right up.
The foam on the filter was coming apart and getting sucked into the chamber. I noticed burnt sooty crap all over the plug.
It was kinda old - a circa 1985 K+N...
I hope that fixes your problem.
I doubt its ignition. On 250r's - they either work or they dont.
On the oil bit - I use some left over Golden Spectro from 1990.. It works.
I had similar symptoms a few years back.
Bought a new air filter and it cured right up.
The foam on the filter was coming apart and getting sucked into the chamber. I noticed burnt sooty crap all over the plug.
It was kinda old - a circa 1985 K+N...
I hope that fixes your problem.
I doubt its ignition. On 250r's - they either work or they dont.
On the oil bit - I use some left over Golden Spectro from 1990.. It works.


