ATC 3-Wheelers Discussions on ATC 3-Wheelers.

Need more help ?

Old Nov 2, 2005 | 04:41 PM
  #1  
Alans250sx's Avatar
Thread Starter
|
Weekend Warrior
Joined: Nov 2005
Posts: 23
Likes: 0
Default Need more help ?

Also have a problem in my rear ? Like I said yesterday I just got it...It makes a load noise in the rear ? like a clanking noise...? Any idea's

Thanks, Alan
 
Reply
Old Nov 2, 2005 | 04:47 PM
  #2  
ThrashAndCrash's Avatar
Extreme Pro Rider
Joined: Oct 2003
Posts: 3,418
Likes: 0
Default Need more help ?

Put the rearend up in the air on some jack stands. Do a shake down, check hubs, axle bearings, ect
Look HERE for a break-down of where the bearings are you should pay close attention to.
 
Reply
Old Nov 2, 2005 | 10:26 PM
  #3  
Alans250sx's Avatar
Thread Starter
|
Weekend Warrior
Joined: Nov 2005
Posts: 23
Likes: 0
Default Need more help ?

Once again thank you. I will have to do that this weekend. Any other ideas from anyone ?


Alan[img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-wink.gif[/img][img]i/expressions/face-icon-small-sad.gif[/img][img]i/expressions/face-icon-small-blush.gif[/img][img]i/expressions/face-icon-small-sad.gif[/img][img]i/expressions/face-icon-small-wink.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img]
 
Reply
Old Nov 3, 2005 | 09:00 AM
  #4  
ScottZJ's Avatar
Weekend Warrior
Joined: Sep 2002
Posts: 9
Likes: 0
Default Need more help ?

It sounds like the dreaded rear diff problem. But like stated above, check the wheel bearings first. If they are good, I would go online and get you a diff bearing kit and seal. Take the rear axle off and pull that rear diff apart to see if anything is damaged. You DONT want to run it like that, cuz if its still good, then replacing the bearings and seals will take care of it. They go from anywhere from 60-180$ on ebay.
 
Reply
Old Nov 3, 2005 | 06:14 PM
  #5  
Alans250sx's Avatar
Thread Starter
|
Weekend Warrior
Joined: Nov 2005
Posts: 23
Likes: 0
Default Need more help ?

So if it is not the wheel berring what will it be ? The guy I bought it from said he tried to drain and put new fluid every few rides to flush it out ? He thought maybe dirt got in it.. Also he gave me a new drivshaft for it ? said he had bought it for a spare ?

Alan
 
Reply
Old Dec 5, 2005 | 10:13 PM
  #6  
lawnboymelvin's Avatar
Pro Rider
Joined: Dec 2005
Posts: 265
Likes: 0
Default Need more help ?

hi the gear might have a couple of peices missing off it so it might make it clang
 
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:59 PM.