200x locknut wrench special tool 24mmX20mm
#1
So I need to replace the clutch on my 84 200x.
I was able to get the 2 locknuts off after some "convincing", but I would like to buy the tool. Dealer quoted $30 (its one socket). Does anyone here know where I could get one maybe a little cheaper? It's Honda pn: 07716-0020100 20mmX24mm locknut wrench.
Just for FYI, here was my quote from Metro Powersports
$67 for just clutch fibres ($25 on Ebay)
$16 for clutch springs ($13 on Ebay).
$107 for complete kit (with steel plates).
$30 for above tool
All would take a week to order in.
I was able to get the 2 locknuts off after some "convincing", but I would like to buy the tool. Dealer quoted $30 (its one socket). Does anyone here know where I could get one maybe a little cheaper? It's Honda pn: 07716-0020100 20mmX24mm locknut wrench.
Just for FYI, here was my quote from Metro Powersports
$67 for just clutch fibres ($25 on Ebay)
$16 for clutch springs ($13 on Ebay).
$107 for complete kit (with steel plates).
$30 for above tool
All would take a week to order in.
#2
#3
http://www.crosstec.com/wc.dll?ctwp~getapplctns1~1001~1002~1~0007~000257
I bought the tool at my local bike shop for $12
I bought the tool at my local bike shop for $12
#5
Nevermind What?
I bought the fibers and springs on ebay today ($45 shipped to my door).
I only have Metro Power Rip off Sports/Planet Rip off Honda to buy my Honda parts from, so I guess I'll just use the old screwdriver and hammer with lots of red loctite to put it back together. I'll be screwed if I have to do it again, but whatever, I'll deal with that when the time comes.
In fact, if it happens again I'm putting in the 200s engine.
Too bad they didn't make the 200s a kick start. The pull start is the only thing that ever goes wrong with my 200s (besides running out of gas:-)
I bought the fibers and springs on ebay today ($45 shipped to my door).
I only have Metro Power Rip off Sports/Planet Rip off Honda to buy my Honda parts from, so I guess I'll just use the old screwdriver and hammer with lots of red loctite to put it back together. I'll be screwed if I have to do it again, but whatever, I'll deal with that when the time comes.
In fact, if it happens again I'm putting in the 200s engine.
Too bad they didn't make the 200s a kick start. The pull start is the only thing that ever goes wrong with my 200s (besides running out of gas:-)
#6
Just for future use;
L=dennis kirk]www.denniskirk.com[/L]
oil filter(rotor)/clutch nut part # 28-1970 $10.99
fiber clutch discs part #s 381826 or 38204 $28.99 or $42.99
clutch springs part #s 38815 or 382007 $7.99 or $9.99
They carry alot of 3 wheeler parts yet with orders over $100 shipped free (including tires!)
orders under $100 are shipped for only $6.95
Jeff
L=dennis kirk]www.denniskirk.com[/L]
oil filter(rotor)/clutch nut part # 28-1970 $10.99
fiber clutch discs part #s 381826 or 38204 $28.99 or $42.99
clutch springs part #s 38815 or 382007 $7.99 or $9.99
They carry alot of 3 wheeler parts yet with orders over $100 shipped free (including tires!)
orders under $100 are shipped for only $6.95
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




