I rebuilt a 110. I put in new valves and cut the seats, new rings, and rebuilt the carb. The bike will idel for a while and then act like it runs out of gas and stauls. Sometimes it will restart with one pull sometimes several. Also th bike has no power at low rpm. At full throtel the bike misses and never realy winds out. I think I have it timed right but I am not sure. Any suggestions?

 

Have you looked at the Plug to see Color
Also it sounds possibly your cam timing is off 1 tooth
What year is the Trike
Ray

 

I have to go with Ray on this. It sounds very much like the valve timing.

 

Sounds like cam timing to me. Also, when the cam gets old and worn you will have less lift and duration. I changed to performance cams from Dratv on two of my 110's and the power and torque increase was very noticeable.