Hello...
I have a 1982 atc250r. I would like to change the rear axle hubs to a later year. I am limited to wheel choices with the stock 4/130 bolt pattern, so I would like to change if possible and use a hub from either a later 250r or from a 200x. Can anyone tell me what will work on the 1982 axle spline????
Thank you in advance....

 

Man whats with all these posts concerning 250r's? Im yet to have even seen one around my town. Sorry calibear can't help you here, but I will do you the favor of putting your post at the top of the list seeing as its unanswered [img]i/expressions/face-icon-small-smile.gif[/img]. Maybe email dratv.com they have been pretty helpful with me in the past. Although I don't think they stock much for 250r's.

 

Sorry I can't help you with the axle spline question, but the rear rims for any suzuki trike or quadrunner built between '84 and '87, plus the 85-88 LT230 Quadsport, the 89-90 LT250 Quadrunner, the 85-86 LT250R Quadracer, 87-88 LT300EH Quadrunner, Plus the ATC 185 and 200S, all have the 4/130 Bolt Pattern, and most of the Suzukis are 9 or 10 inch rims. You think your bolt pattern is hard to find? I ride an '83 Yamaha Tri-Moto 225DX. It has a 3x100 bolt pattern. find anything other than an 8" rim to fit that. If you do, lemme know

 

i use this sight to see if something will interchange on my trikes

http://www.mud-throwers.com/atv_wheel_chart

 

Try asking a Honda Dealer???

 

hubs from a 300 or 400ex will fit perfectly.

More info here - www.airfoolers.com

 

I tried 83-84 R and they don't fit!

 

try this ,,, got alot of good info here ... Login

 

That is going to be real tough if you are going to keep the 4/130 bolt pattern. I swapped to 4/110.