I have a yamaha 125 3 wheeler I think it's between 79-81 could not find a year on the trike but its not getting fuel. there is fuel to the carb and I just cleaned and completely blew out the carb. it runs If I pore gas in the cylinder until that gas burns off. Does anybody have any suggestions to fix this problem.

 

Sounds like either the float is out of adjustment, or that you still have a jet/passage blocked in the carb.

 

I would be willing to bet your main jet is still plugged (large jet directly under the slide needle) You should be able to hold the carb up without the slide on it & see light through it. Very tiny hole, easy to miss.