Hey every one, I an in need of the infinite wisdom that this forum has to offer. I have a 1999 Honda 400ex. Some time between 1999 and 2001 I replaced the rear axle/bearing carrier. It is of the brand R U Racing. It is a taper style bearing and came with the brake stay (the bracket the holds the caliper on). I have bent the brake stay and now need a new one. I can't find anything about this company. I am afraid that they went out of business shortly after I got this thing and I am not going to be able to get the necessary parts that I need to keep this old quad running. I really don't want to replace the entire carrier; I have massive hope that some one out there in forum land will have the answer that I am looking for to the question: Where can I get a new RU Racing brake stay. Thanks everyone!

 

go on ebay and see if you can find it there

 

I have tried ebay and every single search engine I could think of. I can't find anything about this part. I can only find a company that makes toy cars.

 

hay bud i had the same problem for a 99 400ex i found out that rad manufactureing was the original maker of ru racing mine was an rxh9 and they still sell parts for them but you will probly have to talk to someone who has been working there for a while i just ordered new seals for mine yesterday.....anyways hope this helps you out as it took me forever to figure this out..............435.574.2604 is rads num later!!

 

The stock brake mount won't work?
I've not seen your brand of carrier but any one I have seen, the stock brake mount works.

 

The tools required for this procedure are for the most part just the typical tools that most wrenchers already should have.