bore???

Reply Subscribe

Thread Tools

Search this Thread

Dec 29, 2003 | 01:32 PM

LAUGHINGGAS

Thread Starter

Weekend Warrior

Joined: Nov 2003

Posts: 16

Likes: 0

bore???

is the stock cylinder boreable? a friend just bought a 01' with a severely damaged sleeve. local machine shop says it will have to be bored .030" to clean it up. not sure if you can bore it, i think the stock cylinder is coated?!? thanks for any help/advice!

Dec 29, 2003 | 02:36 PM

BillDS650

Pro Rider

Joined: Jan 2002

Posts: 1,461

Likes: 0

bore???

That might be too much to take out. I know you can go to 102 mm piston stock bore is 100mm and have the cylinder re coated. I would send to TVI for 720 set up.

Dec 29, 2003 | 04:39 PM

MrHorsepower

Pro Rider - Oldham Racing
BUILDS THE FASTEST DS's ON THE PLANET!
Want a hot DS, or maybe one of the fastest DS's on the planet? This is the man to contact!

Joined: Jun 2003

Posts: 553

Likes: 0

bore???

The stock cyl can be bored 2mm which is .080. Then it must have the nikisil (spelling) put back on.

MrHorsepower

Dec 29, 2003 | 07:22 PM

THEBOM

Pro Rider
THEBOM Racing. If it don't scare you a little, it's not going fast enough !!!

Joined: Jan 2001

Posts: 1,251

Likes: 0

bore???

MrHorsepower, aren't you doing those now? [img]i/expressions/face-icon-small-smile.gif[/img]

Dec 29, 2003 | 07:41 PM

MrHorsepower

Pro Rider - Oldham Racing
BUILDS THE FASTEST DS's ON THE PLANET!
Want a hot DS, or maybe one of the fastest DS's on the planet? This is the man to contact!

Joined: Jun 2003

Posts: 553

Likes: 0

bore???

[img]i/expressions/face-icon-small-smile.gif[/img]

MrHorsepower