Can any one tell me where I should be at for jetting and clip height ? I am running a rwr stage 1 with a accle pump and ported intake. I am at about 1000 above sea leavle and will be running at about 75 degrees.

 

they send that tm 45 with a 150 main jet but i think you might want to be at about 145, but we would also need to know if you are running a air tube to the airbox ot carb mount that is needed info to really help.

 

OOOOOOOOO yha !!! I forgot about that. I am running with the air tube and box but no lid[img]i/expressions/face-icon-small-smile.gif[/img]

 

i'd try in the 145 range, that is where i was running with carb mount, went to the tube and i'm up to 160 but that is with the 720 version.

 

any sugestions on needle height[img]i/expressions/face-icon-small-smile.gif[/img]

 

bump!

 

Im on the middle possition if I recall right. Ill need to double check. where are you at for pilot? im at 32.5 and I can still turn the air screw out and out with no change in idle. so Im at 2.5 turns. the pump needle is turned slightly to the right. right at the intake.
do a search on tm45 and pm hightower you will get tuns of info.
Sam OUT[img]i/expressions/face-icon-small-tongue.gif[/img]