Mr. HP Engine Kits
#1
Mr. HP Engine Kits
It has quieted down in here lately. Is Mr. HP still working on various engine kits - stroker crank, 105.5mm cylinder, mega flow cylinder head etc. Where are the latest dyno charts for each configuration - huge bore w/stock stroke, hug stroke with stock bore, huge bore w/huge stroke, gas, alcohol, NOS, etc.?
Did TheBom ever dyno his latest DS'd on and off NOS?
Did TheBom ever dyno his latest DS'd on and off NOS?
#2
#3
Mr. HP Engine Kits
We have been very busy lately. Here are some quick numbers for you.
My Genesis stock bore that made 70+hp with single 48HV Lectron is now making 77hp with twin Lectrons on it.
Randalls 8mm stroker with stock bore (715cc) is making 76hp with 48HV and 84+hp with twins.
We are still studying acceleration curves and on track performance with the twins to see if they are really going faster.
Capewindy's 730 proto engine made 76hp with down pipe and 72hp with CT inframe pipe and was set to perform well at DS days but he had an overheating problem that happened when the fan quit and he wasnt aware of it. He made about 6 back to back laps up the hill and the engine began to loose power and didnt run well the rest of the weekend.
We plan to put up several dyno sheets on the site as soon as we get a little time. At this point we have at least 700 pulls on different DS combo's. We have learned alot about cams, carbs, exhaust, etc.
MrHorsepower
My Genesis stock bore that made 70+hp with single 48HV Lectron is now making 77hp with twin Lectrons on it.
Randalls 8mm stroker with stock bore (715cc) is making 76hp with 48HV and 84+hp with twins.
We are still studying acceleration curves and on track performance with the twins to see if they are really going faster.
Capewindy's 730 proto engine made 76hp with down pipe and 72hp with CT inframe pipe and was set to perform well at DS days but he had an overheating problem that happened when the fan quit and he wasnt aware of it. He made about 6 back to back laps up the hill and the engine began to loose power and didnt run well the rest of the weekend.
We plan to put up several dyno sheets on the site as soon as we get a little time. At this point we have at least 700 pulls on different DS combo's. We have learned alot about cams, carbs, exhaust, etc.
MrHorsepower
#5
#6
#7
Mr. HP Engine Kits
Eric wouldn't release the size of the twin lectrons, top secret stuff going on their!
Eventually I will get a Dyno run with my 730, but first I need a finished engine! Keep our fingers crossed, my parts should be here in a week!
Dune season is here, I can feel it in the air.
Eventually I will get a Dyno run with my 730, but first I need a finished engine! Keep our fingers crossed, my parts should be here in a week!
Dune season is here, I can feel it in the air.
Thread
Thread Starter
Forum
Replies
Last Post
KimSJoh
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
14
07-18-2015 07:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)