CAN-AM (BRP) Discussions about CAN-AM ATVs.

Need help with setup!

Thread Tools
 
Search this Thread
 
Old Mar 12, 2005 | 09:37 PM
  #1  
ThePitbull's Avatar
Thread Starter
|
Weekend Warrior
Joined: Jan 2005
Posts: 10
Likes: 0
Default Need help with setup!

HI guys! I am new to the forums,but from what I have read on here you are all more than willing to help a brother out. So here goes. I drag race my DS often in the summer,and I was wondering if any of you could help me out with my setup. I race 300 feet in sand on flat surface. I can bet everything but a yfz 450 they get me out of the hole and beat me by half quad or so. I run 18 in. razr2 and take of in 2nd. Also my DS is piped, jetted, and K&N airfilter. All with stock gearing. Hope I covered everything.
 
Reply
Old Mar 12, 2005 | 10:51 PM
  #2  
SANDMAN430's Avatar
Elite Pro Rider
Joined: Sep 2002
Posts: 6,641
Likes: 0
Default Need help with setup!

try some 22" 8 paddle and a 15-42 gearing start in second.
 
Reply
Old Mar 12, 2005 | 11:08 PM
  #3  
sam's Avatar
sam
Pro Rider
Joined: Aug 1999
Posts: 728
Likes: 0
Default Need help with setup!

I do the same to in the summer check out my picks, also my set up for last year drags was this quad slammed, maxis 4 snows , 14/40 those 18s I would think bring your gearing down to a 15/ 40 front or close to it. I'm also running a tm45 and rwr cdi I ran 1 yfz last yr. did not have any trouble but he was on my heals, I'm a big dude to 6'3" 260. if you have any question please ask!
do you have trouble keeping the front down? if so soften the rear shock almost all the way and strap the front. you will be able to launch at 5-6 gs w/ no prob.
 
Reply
Old Mar 12, 2005 | 11:29 PM
  #4  
ThePitbull's Avatar
Thread Starter
|
Weekend Warrior
Joined: Jan 2005
Posts: 10
Likes: 0
Default Need help with setup!

Thanks for the responses. I already have it slammed to the ground, I put the 18 in tires on to give me more push out of the hole or so I that. I will try the paddles and the gearing thanks again.
 
Reply
Old Mar 12, 2005 | 11:31 PM
  #5  
sam's Avatar
sam
Pro Rider
Joined: Aug 1999
Posts: 728
Likes: 0
Default Need help with setup!

Put some pics up we want to see her![img]i/expressions/face-icon-small-smile.gif[/img]
 
Reply
Old Mar 13, 2005 | 12:13 AM
  #6  
ThePitbull's Avatar
Thread Starter
|
Weekend Warrior
Joined: Jan 2005
Posts: 10
Likes: 0
Default Need help with setup!

I'll go out tomorrow and snap a few shots of my toys, and then post them.
 
Reply
Old Mar 13, 2005 | 12:29 AM
  #7  
SANDMAN430's Avatar
Elite Pro Rider
Joined: Sep 2002
Posts: 6,641
Likes: 0
Default Need help with setup!

make it lighter that helps a lot.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cswiger
Polaris Side by Sides
12
Oct 5, 2015 03:34 PM
jbrewster94
Yamaha
0
Sep 23, 2015 04:16 PM
MrTrashMan2U
1) Engine problems..
0
Sep 9, 2015 11:11 AM
Erick J. Edler
General Chat
4
Aug 29, 2015 01:32 PM
cornermike
Polaris
1
Jul 8, 2015 11:44 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 10:31 AM.