Question about idle jet size if anyone cal help?
#1
Question about idle jet size if anyone cal help?
I have read posts in the past about if you are past 3 turns out you need the next bigger size idle jet well got mine good and running today and I started at 4 turns out turned it in half turn increments slow and it started to mis a little shut it off counted how many turns it took to seat it lightly which was 2 then turned it back to 4 turns then turned it out slowly in half turn increments till it missed a little then shut it off and turned it in til the needle was seated which was 7 turns so then i took 7 minus the 2 from the bottom and figured 5 turns divided by 2 which was 2 1/2 plus the 2 from the bottom it took to sputter = 4 1/2 turns from the lightly seated position it runs good now but my question is do i need to get the next bigger size idle jet to keep the turns down to 2 1/2 to 3? any advice thanks fellas
#2
Thread
Thread Starter
Forum
Replies
Last Post
ranvette
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
7
07-12-2015 06:34 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)