San Joaquin sand drags
#1
San Joaquin sand drags
I knew this would get you Fresno/clovis riders to take a look. Just finished harvest and the bikes are screaming to get out. there is no real sponsored drags just 15 to 20 biikes dragging each other up and down the river bed. Nothing fancy just alot of friendly competition and a hole lot of beer drinking after all is said and done. this is kinda get to know your neighbor and fellow friends from the forum. Were gonna be out there this sunday the 1 or 2 which ever sunday falls on. anyone interested we will about 2 miles north of highway180 on san mateo avenue. If you pass spreckals sugar turn around becouse you just passed the road. Like to see some new faces and some old ones . everone welcome i guess this is what you call the okie olympics with beer drinking and bike racing. BOY IT SURE FEELS GOOD TO BE DONE WITH THOSE 12 TO 20 HOUR DAYS.
#2
#4
#5
San Joaquin sand drags
Barnett 9 disk with rw 60 % springs. This may sound stupid but where do you check to see how big a shot your giving it? my stuff is still all rapped up in the package . i talk ed to a guy that 650 viper told me to and he sent me what he was running except im using a four spray nozzal. maybe i need to open all the little packages.
#6
San Joaquin sand drags
Each hole represents 5 hp. Mine came new with a 15 hp jet installed in it. look at the black round disc on the manifold the holes are very tiny but there should be three if its new. Dont jump striaght to the 20. Learn how to tune it on 15 first. I think your going to find some clutch problems down the road. Consider even heavier springs and you might want to replace the actuater pin with a stromger one from TVI. Its a common problem and they have a better one thats not suppose to break.
#7
San Joaquin sand drags
Ok scatter it has a fifteendisk installed on the manifold, there was 3 little holes in it. im gonna order that vortex cdi monday 5 gear and that bike was bouncing off my white bros cdi. it would be a waste of time to put the kit on there with only 8200 tops. what is the rev limit on the vortex? i know it has 10 settings but what is the top limit?
Trending Topics
#8
San Joaquin sand drags
MAP1 has a rev limit of 8900rpm. full advance. Map1 is what you want to run the majoirty of the time. You have to be careful running advanced on the juice. Some say you should run a retarded map when your running nitrous. I talked to 222 about it and he said its a myth that you have to run retarded. Octane is more important. Im currently on a 20shot on map one no problems. I have a 25 shot coming this week. Are you at 13:1? What pipe are you running? I just got the CT racing pipe on couple of days ago sounds really good, taking it out today to do some tuning. Pm me your e-mail address and I will send some pics to you of my install.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)