i bought a set of armidillo a arms a few months back and then on day the rod on my works shocks snapped after doin some measurin and checkin my a arms were binding on the shocks. i put the stock shocks back on and they hit even worse like dents in the body of the shock anybody else have anything similar to this??? thanks alot

 

I am only guessing that the lower a arms need to be reversed.
That is , exchange the lower arms right to left - left to right.
I thought I heard of this problem before.
Give Armadillo a call.

(406)961-1979

info@armadillooff-road.com

 

i think thats it i did some measurin and they do seem to sit just a little different not much like an 1/8 of an inch but that could be enough thanks alot oldman

 

holy crap, the same thing happened to me!!!!!!!! i have works triple rates and armadillo a-arms. the base of the shock retaining seat touches the a-arm eyelet. this does not allow the shock to pivot like it should. you got to have works put extended eylets on the base of the shock. i did this and it is fine now. pm me for more details. been there done that!!!

 

sweet thats good to know the shocks are at works right now so i call them in the mornin thanks everybody!! thats a good thing to know makes me wonder if armadillo knows anything about that or works for that matter ill have to do some callin when i get a chance to let people know and maybe save someone else from a 3 wheel ride back to camp [img]i/expressions/face-icon-small-smile.gif[/img] Thanks