Thought I would share this since some people like to have information in hand when they call their dealers.

1. Turn Ignition to Lights On position
2. Set speedometer to Engine Hours
3. Press and Hold selector button while switching the Hi-Lo beam 3 times in a row
4. Diagnostics mode is activated now
5. Use selector button to go through codes
6. END will come up when all codes are displayed
7. To end mode hold the selector button for more than 2 seconds

Codes can be found in the service manual that is available from the dealer.

 

sorry but what is this? i am not following what it is for...

 

To get fault codes from your Outty 800 in case you are experiencing trouble just like the title implys

 

SORRY! i didnt understand your TITLE!..didnt mean to get you all angry

that why i asked --i dont know what ecm codes are

this is how you spell implies

 

did not get angry [img]i/expressions/face-icon-small-wink.gif[/img] ECM codes are fault codes set on your bike to let technicians know what sensor or system is causing your unit problems. They can be useful for a variety of information such as allowing you to see if lets say your coil is causing your miss or things like that

 

Good info, I just picked up the service manual a few days ago but haven't scanned through it too much. Is that info in there; I can look for myself but if you know off the cuff I'd be interested in hearing it.
Now I'll need to find the software and interface to set tinker with it myself. ;-)

 

I memorized the technique out of the update manual for the 2006 models. It should be in the service manual but you never know about Bombardier and their information locations I will look at the shop in the next few days and let you know.