cylinder looks great! a low cost alternative to a new cast cylinder.

here is a pic of my 720cc millenium cylinder: http://forums.atvconnection.com/i/Ga..._top_small.jpg

 

LMAO!!! this is some good stuff!!

 

Better get you sum[img]i/expressions/face-icon-small-happy.gif[/img]

 

 

That thing looks great!

I'ld love to see one in person.

What's the cost of that + a piston?

Is it a 105.5 or 105 bore? Not that .5 makes any difference just wondering if the same pistons that the new cylinder guys are selling will work with this kit.

 

 

I went with the 105mm I dont tknow if the cylinder could handle the 105.5mm resone was one of you guys told me that CT racing was getting ride of there 105mm pistons 13 to 1 for under 150.00 that was deal!

 

mine is bored to 105.0mm ($215 shipped) for use with low cost JE shelf piston ($160 shipped). if you aluminum sleeve the cylinder you could go with the 105.5mm bore and use those 105.5mm pistons. the aluminum sleeve is around $400.

 

Scooby:

Are you saying you bored your stock jug to a 105 WITHOUT a sleeve?

Those prices sound great.

 

YES! Remember this is not for a stroker motor. The stock stroke doesn't allow the piston rings to go below the engine case. The cylinder skirt that extends below the case doesn't serve much purpose. The piston itself doesn't contact the cylinder bore. There is no pressure on the the cylinder bore below the case. So having a thin cylinder skirt is not real important.