Cylinder Studs??
Aug 15, 2006 | 04:37 PM
#22
Extreme Pro Rider
Joined: Nov 2005
Posts: 3,940
Likes: 0
Cylinder Studs??
Originally posted by: choosetolose04
Well, you must NOT be an HPR stud then.
Im only stating what the requirements are to be an HPR stud. You asked questions...Im providing answers. Simple math.
Oh yeah, we have all heard those excuses of a "slow" track...I've even used it a time or two....hmm, must be the reason why I only ran 4.6's instead of 4.4's.....due to my tires blowing off at the start.
Originally posted by: DSNUT
LOL![img]i/expressions/face-icon-small-happy.gif[/img] First, I didn't spend near that kind of money on the motor..........second, that stock motor was on NOS and well over 100 lbs lighter. [img]i/expressions/face-icon-small-smile.gif[/img]
My run was 4.71 with just an 800 in a 415 - 425 lb chassis. How many hundrenths slower was that than your 4.6#?
Oh yeah, everyone i talked to at Dunefest said they were running 2 tenths slower than the dirt or heavy sand tracks because the sand was so loose and deep that weekend.
I am not dissatisfied with the motor's power.......I don't think HPR is either[img]i/expressions/face-icon-small-smile.gif[/img]
LOL![img]i/expressions/face-icon-small-happy.gif[/img] First, I didn't spend near that kind of money on the motor..........second, that stock motor was on NOS and well over 100 lbs lighter. [img]i/expressions/face-icon-small-smile.gif[/img]
My run was 4.71 with just an 800 in a 415 - 425 lb chassis. How many hundrenths slower was that than your 4.6#?
Oh yeah, everyone i talked to at Dunefest said they were running 2 tenths slower than the dirt or heavy sand tracks because the sand was so loose and deep that weekend.
I am not dissatisfied with the motor's power.......I don't think HPR is either[img]i/expressions/face-icon-small-smile.gif[/img]
Well, you must NOT be an HPR stud then.
Im only stating what the requirements are to be an HPR stud. You asked questions...Im providing answers. Simple math.
Oh yeah, we have all heard those excuses of a "slow" track...I've even used it a time or two....hmm, must be the reason why I only ran 4.6's instead of 4.4's.....due to my tires blowing off at the start.
I just wanted you to be proud of me[img]i/expressions/face-icon-small-blush.gif[/img] lol
If I had rotated the gizwheel another degree or two and adjusted the cryoscopic resonator on the back side of the firmination algometer I could have laid down 3 more parsecs of transmodulation in the first part of the race. The humodifier was set for the wrong harmonization which put the bramostat out of configuration. This cost me bigtime at the end of the track!!![img]i/expressions/face-icon-small-disgusted.gif[/img]
If i had gotten 1 more pass after making these critical adjustments, we would have easily turned 2.4's![img]i/expressions/face-icon-small-wink.gif[/img]
Aug 15, 2006 | 04:38 PM
#23
Extreme Pro Rider
Joined: Nov 2005
Posts: 3,940
Likes: 0
Cylinder Studs??
Originally posted by: ERBEDS650
I was called STUDMUFFIN this morning by the G/F[img]i/expressions/face-icon-small-happy.gif[/img]
I was called STUDMUFFIN this morning by the G/F[img]i/expressions/face-icon-small-happy.gif[/img]
Aug 15, 2006 | 04:40 PM
#24
Extreme Pro Rider
Joined: Apr 2004
Posts: 4,078
Likes: 0
Cylinder Studs??
Originally posted by: DSNUT
Mark - be proud of your bias[img]i/expressions/face-icon-small-smile.gif[/img] To not embrace it is to either be ashamed of it or to assume we aren't bright enough to see it![img]i/expressions/face-icon-small-smile.gif[/img]
I am an HPR stud and proud of it!..............no matter what Scott says about my eligibility, lol[img]i/expressions/face-icon-small-happy.gif[/img]
LMAO[img]i/expressions/face-icon-small-happy.gif[/img]
I'm just funnin' you guys[img]i/expressions/face-icon-small-wink.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img]
Originally posted by: Goodsound
You guys dont need to call me a PAMI Stud.............just "Stud" will do.[img]i/expressions/face-icon-small-happy.gif[/img]
You guys dont need to call me a PAMI Stud.............just "Stud" will do.[img]i/expressions/face-icon-small-happy.gif[/img]
I am an HPR stud and proud of it!..............no matter what Scott says about my eligibility, lol[img]i/expressions/face-icon-small-happy.gif[/img]
LMAO[img]i/expressions/face-icon-small-happy.gif[/img]
I'm just funnin' you guys[img]i/expressions/face-icon-small-wink.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img]
Let me clarify something while we are discussing studs.....Im not a Pami stud, YET!
Aug 15, 2006 | 04:49 PM
#25
Extreme Pro Rider
Joined: Nov 2005
Posts: 3,940
Likes: 0
Cylinder Studs??
Originally posted by: choosetolose04
Let me clarify something while we are discussing studs.....Im not a Pami stud, YET!
Originally posted by: DSNUT
Mark - be proud of your bias[img]i/expressions/face-icon-small-smile.gif[/img] To not embrace it is to either be ashamed of it or to assume we aren't bright enough to see it![img]i/expressions/face-icon-small-smile.gif[/img]
I am an HPR stud and proud of it!..............no matter what Scott says about my eligibility, lol[img]i/expressions/face-icon-small-happy.gif[/img]
LMAO[img]i/expressions/face-icon-small-happy.gif[/img]
I'm just funnin' you guys[img]i/expressions/face-icon-small-wink.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img]
Originally posted by: Goodsound
You guys dont need to call me a PAMI Stud.............just "Stud" will do.[img]i/expressions/face-icon-small-happy.gif[/img]
You guys dont need to call me a PAMI Stud.............just "Stud" will do.[img]i/expressions/face-icon-small-happy.gif[/img]
I am an HPR stud and proud of it!..............no matter what Scott says about my eligibility, lol[img]i/expressions/face-icon-small-happy.gif[/img]
LMAO[img]i/expressions/face-icon-small-happy.gif[/img]
I'm just funnin' you guys[img]i/expressions/face-icon-small-wink.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img]
Let me clarify something while we are discussing studs.....Im not a Pami stud, YET!
Hey ERBE, i was just kidding man...............btw[img]i/expressions/face-icon-small-wink.gif[/img]
Aug 15, 2006 | 04:54 PM
#27
Extreme Pro Rider
Joined: Apr 2004
Posts: 4,078
Likes: 0
Cylinder Studs??
Originally posted by: DSNUT
As soon as the woman becomes pregnant, your a Dad! You have already conceived this motor, you are a Pami Stud[img]i/expressions/face-icon-small-wink.gif[/img]................[img]i/expressions/face-icon-small-happy.gif[/img]
Hey ERBE, i was just kidding man...............btw[img]i/expressions/face-icon-small-wink.gif[/img]
Originally posted by: choosetolose04
Let me clarify something while we are discussing studs.....Im not a Pami stud, YET!
Originally posted by: DSNUT
Mark - be proud of your bias[img]i/expressions/face-icon-small-smile.gif[/img] To not embrace it is to either be ashamed of it or to assume we aren't bright enough to see it![img]i/expressions/face-icon-small-smile.gif[/img]
I am an HPR stud and proud of it!..............no matter what Scott says about my eligibility, lol[img]i/expressions/face-icon-small-happy.gif[/img]
LMAO[img]i/expressions/face-icon-small-happy.gif[/img]
I'm just funnin' you guys[img]i/expressions/face-icon-small-wink.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img]
Originally posted by: Goodsound
You guys dont need to call me a PAMI Stud.............just "Stud" will do.[img]i/expressions/face-icon-small-happy.gif[/img]
You guys dont need to call me a PAMI Stud.............just "Stud" will do.[img]i/expressions/face-icon-small-happy.gif[/img]
I am an HPR stud and proud of it!..............no matter what Scott says about my eligibility, lol[img]i/expressions/face-icon-small-happy.gif[/img]
LMAO[img]i/expressions/face-icon-small-happy.gif[/img]
I'm just funnin' you guys[img]i/expressions/face-icon-small-wink.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img]
Let me clarify something while we are discussing studs.....Im not a Pami stud, YET!
Hey ERBE, i was just kidding man...............btw[img]i/expressions/face-icon-small-wink.gif[/img]
Just so you think so.....is all that matters anyway,
[img]i/expressions/face-icon-small-wink.gif[/img]
Aug 15, 2006 | 04:58 PM
#28
Pro Rider
Joined: Nov 2004
Posts: 776
Likes: 0
Cylinder Studs??
Choose you know different groups have different requirments for stud. So don't be so hard on Nut. If he needs to go to the 100lbs card so be it. KMS's raptor ran 4.2 at 480 lbs.Hmmm ok he wasnt using nitrous. Hmmm no it doesnt count if you tried and can't tune it. So check your ego Nut. If running 2 tenths slower then last year and breaking makes you a HPR stud then you the man. I'd say go hang with the Raptor guys but they aren't that slow. So keep writing those checks cause someone is gonna want to come cash them.[img]i/expressions/face-icon-small-wink.gif[/img]
Aug 15, 2006 | 05:02 PM
#29
Extreme Pro Rider
Joined: Nov 2005
Posts: 3,940
Likes: 0
Cylinder Studs??
Scott - Now you're catching on[img]i/expressions/face-icon-small-wink.gif[/img]
ERBE - I know I can count on you to find the cheapest 2x4 around, but spend enough to get a straight one though[img]i/expressions/face-icon-small-smile.gif[/img]
lol
ERBE - I know I can count on you to find the cheapest 2x4 around, but spend enough to get a straight one though[img]i/expressions/face-icon-small-smile.gif[/img]
lol
Aug 15, 2006 | 05:06 PM
#30
Extreme Pro Rider
Joined: Nov 2005
Posts: 3,940
Likes: 0
Cylinder Studs??
Originally posted by: rcoop
Choose you know different groups have different requirments for stud. So don't be so hard on Nut. If he needs to go to the 100lbs card so be it. KMS's raptor ran 4.2 at 480 lbs.Hmmm ok he wasnt using nitrous. Hmmm no it doesnt count if you tried and can't tune it. So check your ego Nut. If running 2 tenths slower then last year and breaking makes you a HPR stud then you the man. I'd say go hang with the Raptor guys but they aren't that slow. So keep writing those checks cause someone is gonna want to come cash them.[img]i/expressions/face-icon-small-wink.gif[/img]
Choose you know different groups have different requirments for stud. So don't be so hard on Nut. If he needs to go to the 100lbs card so be it. KMS's raptor ran 4.2 at 480 lbs.Hmmm ok he wasnt using nitrous. Hmmm no it doesnt count if you tried and can't tune it. So check your ego Nut. If running 2 tenths slower then last year and breaking makes you a HPR stud then you the man. I'd say go hang with the Raptor guys but they aren't that slow. So keep writing those checks cause someone is gonna want to come cash them.[img]i/expressions/face-icon-small-wink.gif[/img]
RCOOP - Quit spinning...........I'm getting dizzy just watching you[img]i/expressions/face-icon-small-wink.gif[/img]