CAN-AM (BRP) Discussions about CAN-AM ATVs.

hard cold starting

Thread Tools
 
Search this Thread
 
  #1  
Old 12-25-2006, 10:21 PM
theothernorm's Avatar
Weekend Warrior
Thread Starter
Join Date: Dec 2006
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default hard cold starting

i was wondering if i could get some help here, I just recently bought a 02 ds650 (love the bike), the problem is , that is one hard bike to start cold, I basically have to hook up the battery charger before i put the key in, cause i know im gonnia kill the batt. trying to start it, I was told to rebuild the carb but i just wanna check with someone that knows before i venture into the air box. Any advice or suggestions would be helpful
 
  #2  
Old 12-25-2006, 10:58 PM
midlifecrisis's Avatar
Trailblazer
Join Date: Apr 2002
Posts: 60
Likes: 0
Received 0 Likes on 0 Posts
Default hard cold starting

Mine can be difficult to start also..but I ;dont kill the batt. doing it..
I think if you search that subject you will find lots of info on it.
goodluck...mike
 
  #3  
Old 12-25-2006, 11:09 PM
DuneRider650's Avatar
Pro Rider
I ride a little here and there......
Join Date: Jul 2004
Posts: 1,821
Likes: 0
Received 0 Likes on 0 Posts
Default hard cold starting

I wouldnt kill the batt trying to start the bike....if you are cranking it that long and its still not starting it isnt going to. Cranking the starter that long is just hard on it. Also...what are your mods? you may need to richen the bike up some. Is your choke out all the way? that last click can be a hard one to get...
 
  #4  
Old 12-25-2006, 11:15 PM
theothernorm's Avatar
Weekend Warrior
Thread Starter
Join Date: Dec 2006
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default hard cold starting

i do make sure that the choke is all the way out, but the bike does start, and once it starts once, im good all day, its just that 1st initial start up
 
  #5  
Old 12-25-2006, 11:49 PM
matts01ds650's Avatar
Trailblazer
Join Date: Apr 2006
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
Default hard cold starting

heres a trick i learned from my dad.....the super cold air leans out the mixture so you dont get enough fuel.....if you cover the intake holes and then try to start it, itll go every time..just let her warm up, put the filter back on and your off
 
  #6  
Old 12-25-2006, 11:52 PM
theothernorm's Avatar
Weekend Warrior
Thread Starter
Join Date: Dec 2006
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default hard cold starting

thanks matt... so i should be able to just cover the breather hole (a rubber nipple on the bottom of the box) or should i phsically remove the air breather and cup the intake?
 
  #7  
Old 12-26-2006, 12:33 PM
FatHolly's Avatar
Pro Rider
Join Date: Sep 2005
Posts: 1,542
Likes: 0
Received 0 Likes on 0 Posts
Default hard cold starting

Have you checked your valve clearances lately?
 
  #8  
Old 12-26-2006, 12:50 PM
derrick2v's Avatar
Trailblazer
Join Date: Dec 2006
Posts: 87
Likes: 0
Received 0 Likes on 0 Posts
Default hard cold starting

When was the last time you had your valves adjusted? My bike did the exact same thing, and i checked the clearence on the valves and they needed to be adjusted, i almost guarentee thats your problem!!!
 
  #9  
Old 12-26-2006, 07:38 PM
grayrider28's Avatar
Trailblazer
Join Date: Nov 2006
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Default hard cold starting

yea i had same problem motor would spin and spin till it was warm then crank..adjust your vales..mine was .008 out on the intake
 
  #10  
Old 12-26-2006, 09:52 PM
bombrider04's Avatar
Pro Rider
Join Date: May 2006
Posts: 2,060
Likes: 0
Received 0 Likes on 0 Posts
Default hard cold starting

Well i would have to say that your valves are off...as for putting you hand over the intake it def works because I have had to do that a few times also...In this case I wouldn't say that it's your carb, but it may need cleaning anyhow...just ride it and have fun...also I would recommend getting a battery tender and check your spark plugs.
 


Quick Reply: hard cold starting



All times are GMT -5. The time now is 11:37 AM.