DS 650 Brake problem..need help fast!!
#11
#12
I had the same problem. I'm sure all of your components ate good. Here's what I did. Open bleed valve. Get a plastic bottle with a tip on in. Fill it with brake fluid. Remove the clamp on the reservoir. Pull hose off reservoir. Stick plastic bottle full of brake fluid on the hose and force the fluid thru the brake system. Make sure to place a plastic container under the caliber as fluid will pour out. When all air is clear from hose tighten bleed valve and replace hose and fill reservoir. You should be good to go. Took me a while to figure it out. Have done it twice with no problem. Good luck...
#13
Old thread
I had the same problem. I'm sure all of your components ate good. Here's what I did. Open bleed valve. Get a plastic bottle with a tip on in. Fill it with brake fluid. Remove the clamp on the reservoir. Pull hose off reservoir. Stick plastic bottle full of brake fluid on the hose and force the fluid thru the brake system. Make sure to place a plastic container under the caliber as fluid will pour out. When all air is clear from hose tighten bleed valve and replace hose and fill reservoir. You should be good to go. Took me a while to figure it out. Have done it twice with no problem. Good luck...
#14
Still good info to share. Somebody is always picking one of these up and seeking info on getting and keeping it in good running order. Some of the newbs might even stumble upon a trick or two to share.
Let's don't scare them away...
Let's don't scare them away...
Thread
Thread Starter
Forum
Replies
Last Post
Chasso
2) Chassis problems..
1
09-19-2015 03:06 AM
oliveiracarlos
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
0
09-07-2015 03:39 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)