Kehin FCR41 carb.
#1
--------------------------------------------------------------------------------
Sounds like most of you are having trouble finding a flatside carb..
I have a frend in TN. that has the dynojet kit, K&N filter,Ronwoods CDI. and end cap that I made for both of ours.
I have FCR41 kehin carb. K&N filter, and end cap, we raced several times and I pulled away every time. Almost forgot, I'm 40# heaver.
His top speed was 76mph and mine was 82mph. you decide.
I have tried both Bigguns pipes. The endcap that I made performs better. With the bigguns pipe I had less torque and power with alot of noise
Sounds like most of you are having trouble finding a flatside carb..
I have a frend in TN. that has the dynojet kit, K&N filter,Ronwoods CDI. and end cap that I made for both of ours.
I have FCR41 kehin carb. K&N filter, and end cap, we raced several times and I pulled away every time. Almost forgot, I'm 40# heaver.
His top speed was 76mph and mine was 82mph. you decide.
I have tried both Bigguns pipes. The endcap that I made performs better. With the bigguns pipe I had less torque and power with alot of noise
#4
I paid $525.00 for the carb from Carb Parts Warehouse in the DirtWheels magazine. The jetting I am currently using is a 55 pilot jet, a OCFMP jet needle on the 5th position from the top and a 170 main jet. Also, you will have to make your own throttle cable and linkage bracket. I have never tried a Woods carb but from what I read in these forums and from experts that I have talked to in my vicinity, the FCR is a far superior carb. Also, there is an unbelievable difference from the stock with a dyno jet kit and my FCR.
Thread
Thread Starter
Forum
Replies
Last Post
Scooter's Shop
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
23
10-22-2015 07:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)