how to remove impeller
#1
03-20-2011, 03:01 PM
Join Date: Apr 2008
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
#2
03-20-2011, 03:55 PM
Military Rider
My hobbies are NASCAR, Rockin' in the Free World, and riding my Sand Pigs at every available opportunity.
My hobbies are NASCAR, Rockin' in the Free World, and riding my Sand Pigs at every available opportunity.
Join Date: May 2005
Posts: 1,804
Likes: 0
Received 0 Likes
on
0 Posts
Impeller should slide out with the clutch cover. Some folks overlook the two bolts holding the starter on, which will prevent the cover from coming off. Should have 12 or 13 bolts to remove then the two for the starter.
Once all of those are out of the way gently apply pressure to the clutch actuator. A lot of times this will raise the cover off of the center case. Do not force it, jimmy it back and forth and you will see it break loose.
Once all of those are out of the way gently apply pressure to the clutch actuator. A lot of times this will raise the cover off of the center case. Do not force it, jimmy it back and forth and you will see it break loose.
#3
03-21-2011, 06:34 AM
Range Rover
Keeps busy in the garage building one thing or another.
Keeps busy in the garage building one thing or another.
Join Date: Dec 2003
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
jrooker6
Polaris
18
04-23-2016 07:36 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)