CAN-AM (BRP) Discussions about CAN-AM ATVs.

need help 07 ds650x

Old Feb 28, 2013 | 03:50 PM
  #1  
bigg1616's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2013
Posts: 9
Likes: 0
Default need help 07 ds650x

In need of some help totally stumped. I have a 07ds650x all stock except uni airfilter. I was riding for a good three hours then it just stopped wouldn't start backup towed it home. Took it to dealer multiple times thinking it was carberator they agreed messed with it . Had it running picked it up took it out ran for around an hour or so then just died again took it back they said carborator was bad. So i bought new one they put it on also adjusted valves rode it around said it was perfect picked it up rode again an an hour or so it died again seems to me like its dieing when it gets hot because after it sits for awhile it will start back up an run for alittle time then do it again.totally lost what should i replace or look at any suggestions would be greatly appreciated thanks. By the way first post if you can't tell
 
Reply
Old Feb 28, 2013 | 06:33 PM
  #2  
bigg1616's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2013
Posts: 9
Likes: 0
Default

Somebody out there have to have some ideas??? What about any of these ideas i have bin given
1 coil or coils
2.spark plug wires
3.regulator
Thanks
 
Reply
Old Mar 1, 2013 | 09:38 PM
  #3  
O2x4's Avatar
Weekend Warrior
Joined: Mar 2013
Posts: 22
Likes: 0
Default cdi

i had put a big gun cdi on my 04baja x. it ran n then all of a sudden shut down. then ran when it wanted. then shut totally down. then ran on off on off. like burnout---nosedive---burnout---nosedive... then I replaced it with a dynatek.
 
Reply
Old Mar 4, 2013 | 07:16 PM
  #4  
bigg1616's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2013
Posts: 9
Likes: 0
Default

Thanks for idea. I have a stock cdi now can anybody tell me what a good after market cdi would be? I plan on leaving ds mostly stock maybe few small things. Any help would be great. Thanks in advance.
 
Reply
Old Mar 5, 2013 | 08:58 PM
  #5  
aceisback's Avatar
Military Rider
My hobbies are NASCAR, Rockin' in the Free World, and riding my Sand Pigs at every available opportunity.
Joined: May 2005
Posts: 1,804
Likes: 0
Default

A BigGun CDI is your best bet. You won't need the Vortex if you plan on staying mainly stock but the BG will give you a little more performance.

Check your grounds. May need to strip some of the paint where all of the wires gather. Check your voltage. 12 while sitting. No lower than 9 while starting. 14.5 while running. The DS likes a fully charged battery. Gremlins otherwise.

Do the OMR stock carb mods.

That vent line that wraps around your fuel tank and gets pinched or kinked on ocassion is where I would start. Causes the exact symptoms you describe. Regulator/rectifier, grounds, battery strength, are where Ilook next.
 
Reply
Old Mar 5, 2013 | 11:29 PM
  #6  
bigg1616's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2013
Posts: 9
Likes: 0
Default

Thanks aceisback... are there different different big gun cdi s?? If so which model is a good one?? Thanks
 
Reply
Old Mar 6, 2013 | 10:30 AM
  #7  
aceisback's Avatar
Military Rider
My hobbies are NASCAR, Rockin' in the Free World, and riding my Sand Pigs at every available opportunity.
Joined: May 2005
Posts: 1,804
Likes: 0
Default

There are two for the DS. Make sure you get the one without the pig tail. Specs are the same, just a difference in the connection. All over freebay for around $130 shipped.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dirtynewguy
CAN-AM (BRP) Ask an Expert!
1
Sep 15, 2014 02:47 PM
dirtynewguy
CAN-AM (BRP)
2
Jul 31, 2014 01:23 PM
DarrinW
CAN-AM (BRP)
7
Jun 30, 2012 11:52 PM
Lesotho
CAN-AM (BRP) Ask an Expert!
9
Feb 28, 2012 07:17 AM
DuneRider650
CAN-AM (BRP)
7
Jan 15, 2007 02:31 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:30 PM.