Intake Manifold ??
#1
12-05-2002, 10:59 PM
Join Date: Sep 2002
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
#4
12-06-2002, 12:23 AM
#5
12-06-2002, 02:11 AM
#6
12-06-2002, 09:49 AM
Intake Manifold ??
The trick is:
Remove the two lower allen bolts first then use an allen key with a ball end and hold pressure on it while you tap the mainfold in the same direction with a mallet. This will break it lose and then you can remove the allen bolt normally. Reverse processs to reinstall manifold. These are the same directions that cam with my Ron Woods manifold. And it worked like a charm.
Remove the two lower allen bolts first then use an allen key with a ball end and hold pressure on it while you tap the mainfold in the same direction with a mallet. This will break it lose and then you can remove the allen bolt normally. Reverse processs to reinstall manifold. These are the same directions that cam with my Ron Woods manifold. And it worked like a charm.
Thread
Thread Starter
Forum
Replies
Last Post
Scooter's Shop
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
23
10-22-2015 07:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)