i got alotta crap with the new ds......soo.....i might can help a few out

a custom made Drag Pipe...it was built by the local muffler shop...it looks like of like the HPR drap pipe except instead of the big chrome piece at the end by the foot peg it just has a 2.5 inch pipe that goes out...its actually pretty neat looking...just needs a nice ceramic coat or chroming.....
Set of rear shaved plastic...is cracked...but good for a spair...
stock front fenders with brackets great shape....
stock head pipe
stock chain guard
twist trottle with cable
upper right a-arm
some CUSTOM springs that were made by scooby...and if you have stock clutch components and wut-not i would not recommend you buying these b/c stuff will break.....
set of pami springs
4 full sets of clutch plates....i dont know if they are stock or what...3 sets are in barnett boxes...they could be barnett's but they could also be stock...i dont know....


i sure could use..............
a set of rear shaved plastic....STEERING STABLIZER(THE MOST)....aftermarket handlebars....and whatever will make this thing not jump all over the road lol...it sure is squirly...

 

PM me about the pegs. I need some in my garage if they are still available.

 

LQQING for Denton Steering Stabilizer.
LQQKING for Ported intake manifold for stock Carb.
LQQKING for stock heel guards in very good condition.

 

i have stock rear black plastic with alba red flames graphics and
stock heel guards on them
stock grab bar
dg aluminum grab bar
set of front struts for drag racing
complete stock airbox ( includes everything. inc. almost new k&n)

 

Anybody have a stock airfilter clamp for in the airbox. In need of one very bad.
Also need a nuetral light for in the dash.

 

I need a rear sub frame that is NOT bent.

 

Im looking for the Fed Ex man to bring my 730 big bore and all the other goodies from Mr.HP.

 

Class III Bolt on Hitch for 1991-2001 Ford Explorer 4 Door 4x4 with 15" spare.
5,000 LBS. WC / 7,500 LBS. WD (GTW)
500 LBS Maximum Tongue Weight
Make an offer and come get it out of my garage.

 

Dude, I pm'd you twice about the front strutts.

Pm me if you still need them out of your garage.

 

Here is some from my list.
Stock 04 X front fenders and brackets
Stock Carb
Stock 03 Swingarm
HPR lightened Front Hubs with rotors, and studs from an 02'
A-arms and belly skid plates from 04 X
Stock Rear Hubs from 04
Brand New in package 15tooth sprocket
04 Alluminum swingarm/caliper bracket/shock mount etc (swap kit)
Justin